A Digital Receiver is a piece of equipment that receives digital programming from Mid-Hudson Cable and converts it into a format that can be connected to and viewed on a TV set. It is also commonly referred to as a Set Top Box (STB) or cable box.
Your smart tv *may* already have a QAM tuner in it that will allow you to receive any unencrypted OTA HD signals available. If so, you will need a good digital antenna. If not, you will need a converter box or a cable box.
Unfortunately, unlike our modems and routers for Internet service, you can ‘t buy your own adapter and avoid the fee if you want digital TV service on multiple TVs without a set-top box.
The encryption used with digital cable service is specific to that cable provider, meaning that even if a digital converter box also worked with cable transmissions, it still wouldn’t have the ability to bypass the encryption and convert the signals for viewing.
Coaxial Output If you have one of those and your STB supports the use of such wires, you can obtain a coaxial splitter. You can purchase 2-way or 6-way splitters, which means you can connect up to 6 screens to one STB. Also, coaxial cables come in a variety of length ranges, similar to HDMI cables .
Although a digital cable box is not required for each TV in your home, only TVs that are connected to a digital cable box will be able to receive channels above 99 and use the interactive programming guide. Areas that have transitioned to all digital service will require a digital cable box for each TV in the home.
The simple answer is no. If your television has a digital tuner — the component that helps you tune into TV stations — already built in, you don’t need a new TV . However, if you’re still using an older TV with an analog tuner built in, like millions of people, the switch didn’t make your TV obsolete.
Evaluate the television quality. If using an antenna to receive television programming, check to see if any programming actually getting to the television. If the antenna is set up properly but no signal is being received by the television, it may need a converter box .
All DTV sets have such a labels or markings that may contain the words “Integrated Digital Tuner,” ” Digital Tuner Built-In,” ” Digital Receiver,” ” Digital Tuner,” “DTV” or “ATSC.” If you can’t find one of these logos, you have an analog television.
Alternatives to the Cable Box Instead of having boxes for all your TVs, you can opt to keep the cable on your main TV , and consider using an antenna(s) to receive programming on one more of your additional TVs – this will at least give you access to local channels .
Digital Transport Adapters (DTAs) are one-way devices that convert incoming digital signals into analog signals that can be viewed by older television sets. Most are simple “channel zappers” that do not support on-board electronic program guides nor can handle interactive applications such as video on demand (VoD).
How to Watch a Digital TV Without Using a Converter Box Connect one end of your coaxial cable to a coaxial port near your television . Connect the other end of your coaxial cable to the coaxial port on the back of your television . Turn your television on and press the “Menu” button on your television remote.
Antennas. Once you have the converter box , you ‘ll need a broadcast TV antenna . Before buying anything, enter your zip code into the Station Finder and make sure there are signals in your area.
Add in the converter box and I get : 3 local channels , CBS, NBC, WLNY55, NBC, Cozi TV, FOX, ABC, LiveWell, My 9, CW, MeTV, PBS, PBS Kids, Discovery, TNT, CNN, iOn, QVC, ESPN, ABC Family, The Weather Channel , CSPAN (4 versions), Antenna TV, WGN, GetTV, FOX Business, Evine (Shopping), RT, 10 music channels (2 have
How to Convert Analog TV to Digital TV Place the digital converter underneath or near the analog TV . Unplug both devices. Unplug the coaxial antenna wire from the analog’s “In” port. Plug the antenna wire into the “In” port on the converter box. Plug one end of the coaxial wire that comes with the box into the “Out to TV ” port on the converter box. FCC.