To set the time and date on your digital watch , press the “Mode” button repeatedly to access the ” Time and Date ” display. Press the button multiple times until the ” Time ” digits begin to flash, noting that on some models you need to hold the button down to access this feature.
Press the “ Set ” button to enter the time setting mode when applicable. If your watch only has a “ Set ” button, you may only need to press this to enter the time setting mode. Other watches may require you to use the “Mode” button to enter the time setting mode and the “ Set ” button to finalize the time .
Set your watch’s time & date If the screen is dim, tap it to wake up the watch. Swipe down from the top of the screen. Tap Settings . If you don’t find it right away, swipe left. Tap System Date & time . Choose your time settings .
Set time , date & time zone Open your phone’s Clock app . Tap More. Settings. Under ” Clock ,” pick your home time zone or change the date and time . To see or hide a clock for your home time zone when you’re in a different time zone, tap Automatic home clock .
How to Set a Basic 2 Button Digital Watch Step 1: Month. Press set (bottom) button till it matches the watch in the photo. Step 2 : Day. Press set (bottom) button till it matches the watch in the photo. Step 3: Hour. Press set (bottom) button till it matches the watch in the photo. Step 4: Minute. Step 5: Finish.
Improperly setting any complication on the watch can cause damages to the movement. Additionally, setting the time backwards rather than forwards can damage the mainspring.
How to Set a Digital Watch Step 1: Punch the Right Buttons . Check your watch for a “Mode” function. Step 2: Set the Hour and Minutes. Continue setting the time. Step 3 : Set an Alarm or Timer. Setting the alarm on the Stauer Magnus involves hitting “Mode” twice, and then selecting a combination of other buttons .
It takes just a few seconds to set your watch’s alarm . Locate the “Mode” button on the digital wrist watch . Press the “Settings” button to start the hour place digits flashing. Press the “Mode” button to shift the flashing to the minute place digits. Press the “Settings” button to save your changes.
The way I turned off the alarm : From the main screen (displays time), press and hold the lap/reset button (bottom right). While the lap/reset button is still pressed, press and release the start/ stop button (top right). The little graph/icon showing the alarm is set will now disappear.
How to set the time on a koretrak watch ? You would have to download the app to your phone. You will have to create an account. You will be able to set the time from your phone.
How to pair your watch with your phone via Bluetooth On your phone, enable Bluetooth. Open the app that corresponds with your watch . Find the ‘discover watch ‘ function – if it doesn’t pop up during the initial setup , you’ll usually find it in the app’s settings . On your watch , make sure Bluetooth is enabled.
1 Charge Remove the face of the fitness tracker from the band to show the USB port. Pull the bottom part of the band down and away from the watch face. Pull the watch face down and out of the top band. Flip the watch face over to reveal the USB port connectors. Connect to your computer’s USB port.