In 12-hour format, it shows the difference between a.m. and p.m. by displaying a p.m. indicator during the latter half of the day. Press the button on the top-left corner of the watch and the seconds will begin to flash. Press the button on the top right to change the minutes.
To set the time , pull the crown fully out. To set your watch’s time , simply pull the crown out to the furthest position from the watch base. When the crown is in this last position, the second hand stops to help you accurately set the time .
How to Change a G – Shock Between 12 – Hour and 24 – Hour Military Time Locate each of the 5 watch buttons. Push the button at 10 o’clock. Then push the button at 6 o’clock. Press the button at 10 o’clock again to stop the second digits from blinking.
How to Set a Basic 2 Button Digital Watch Step 1: Month. Press set (bottom) button till it matches the watch in the photo. Step 2 : Day. Press set (bottom) button till it matches the watch in the photo. Step 3: Hour. Press set (bottom) button till it matches the watch in the photo. Step 4: Minute. Step 5: Finish.
Press the top left button on your watch once. The seconds should begin flashing. Press the lower left button six times until the 12 /24- hour format appears. Press the top right button once to select the 12 – hour time format.
Examine the watch face and locate the buttons labeled “Mode,” ” Adjust ” and “Alarm.” Press the “Mode” button repeatedly until the time display appears on the watch . Hold the “Mode” button until you see the alarm display appear, then release the button. Hold the “Mode” button a second time to enter the time- setting mode.
The alarm is automatically engaged when the display is changed to the Alarm Setting mode. When the alarm is engaged, the alarm mark appears on the Alarm time display and also on the Time/ Calendar (T1) or the Dual Time ( T2 ) display that the alarm is set.
PAIRING THE STRIDE PRO WATCH Open the SONATA STRIDE Watch app on your phone and follow the instructions to pair your phone. Remove the spacer from the crown near 3H, rotate the crown to adjust the time and then press it to start the watch . Wear your STRIDE Pro watch on your wrist. Your watch is paired and calibrated.
Press the “ Set ” button to enter the time setting mode when applicable. If your watch only has a “ Set ” button, you may only need to press this to enter the time setting mode. Other watches may require you to use the “Mode” button to enter the time setting mode and the “ Set ” button to finalize the time .